✔ Revolutionary destruction technology : destroys viruses, bacteria, fungi and chemical pollutants
✔ Does not need to be operated with an air renewal rate of 6 volumes/h
✔ Safe filter replacement as microorganisms are killed before
✔ Does not use any dangerous chemicals
✔ Does not produce any toxic substances like ozone
✔ Used for many years in hospitals
News
Understanding the D50 rating for Air Sampling
Posted by Ian Norman on
Please read the following article written by Pinpoint Scientific with regards to the D50 Physical Efficiency rating. D50 Physical Efficiency
The benefits of Real Time Microbial Monitoring
Posted by Ian Norman on
Please read the following article written by John Cobb on the benefits of using Real Time Microbial Monitoring. Real-Time Microbial Monitoring
Air Purification
Posted by Ian Norman on
Virus-free = worry-free. 6 good reasons for Calistair C300 Air Purifier
- Tags: Air Decontamination
Active Air Sampling
Posted by Ian Norman on
Active Air Sampling is a compendial method for Viable Air Monitoring, the TSI Active Air Sampler is designed for use in aseptic manufacturing areas.There are two recognised methods for Viable Air monitoring described in regulatory documents and often referred to as compendial methods:• Passive Sampling Settle Plates• Volumetric Sampling Active Air Sampler (AAS) The TSI is an AAS Sieve Impactor. Air is drawn through holes or slits in a cap and particles are impacted on the surface of standard plated media. Physical Efficiency of an AAS is classed as d50, this is the particle size at which 50% is impacted on the plate and 50% is exhausted....
Surface Particle Counting
Posted by Ian Norman on
A Portable Measuring System for measuring particles on surfaces according to ISO 16232 (VDA19) and 14644-9. Surface Particle Counting using the glancing light technology according to ISO 14644-9, allows for reproducible and highly accurate measurement. The PartSens+ 4.0 device is a portable measuring system with a wireless measuring head for direct measurement of metallic and non-metallic particles, fibres, dust and other impurities on surfaces. The live image allows the detection of type. (metallic or non-metallic), position and size of the particles. For more information contact info@pmtgb.com